Suitable For Almost All Media Non-Clogging Rubber Three Lobe Pump
Working principle
The parallel, 2-shaft design is common to all Rotary Lobe Pumps. The external synchronizing gear rotates the shafts in opposite directions.
The displacement rotors are fitted on the shafts within the pump casing. The clearances between the rotors and casing are minimized to completely isolate the suction and pressure areas of the pump.
The rotation of the rotors creates a series of chambers within the pump casing. Product fills the chambers on the suction side and is rotated circumferentially to the pressure side. This produces a uniform flow from the suction to the discharge side with no need of valves. The stress to the fluid is negligible as the product is transported almost free of shear and with little pulsation and acceleration.
Specifications:
| ACCUVON | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements
8 steps for your guideline to select ACCUVON pump
- What medium do you need to pump.
- Product viscosity in pump, line and at rest.
- Solid content and percentage concentration
- Specific gravity
- Capacity required
- Pumping temperature
- Discharge pressure or sketch of pipework system
- Suction pressure or sketch of pipework system
Applications
ACCUVON Pump is perfect for many applications requiring a positive displacement pump or a pump that can handle heavy solids and abrasive materials. Below are major markets were we have had many successful installations in various applications.
| | - Dewatering & Digester Feed
- Septage Receiving
- Primary & Secondary Sludge
- Digested & Thickened Sludge
- FOG, DAFT, RAS & WAS
- Sludge Transfer
|
| | - Digester Feed
- Dewatering Feed
- Digester Cleaning
- Slurry Transfer
|
| | - Chemicals
- Oil & Gas
- Oil Spill Cleanup
- Transportation
- Mining
- Pulp & Paper
|
| | - Digester Feed
- Digester Cleanout
- Lagoon Cleanout
- Mobile Slurry Pumping
- Slurry Transfer
|
| | - Winery & Breweries
- Fisheries
- Meat & Poultry Waste
- Sugar Processing
- Tomato Processing
- Potato Processing
|
| | - Vacuum Sewage
- Disposal Trailer
- Holding Tank Cleanout
- Mobile Disposal Systems
- Network Pumping Systems
|
Advantage
• Low shear/Pulse free operation
• Excellent for oil/water and high viscosity liquid.
• Ability to pump at constant pressure at different flow rates
• Self-priming to 8 meters
• Forward and reverse pumping operation
• Space-saving compact design
• 10 to 1 turn down capability and reverse capability
• Run dry ability for a period of time
Structure features
Quality inspection photos
Product Tags:
|
|
Non Clogging Tri Lobe Pump Practical anti Abrasion Practical Images
|
