Self Priming Lobe Pump And MultiCrusher For Meat And Poultry Waste
Accuvon double pack for Meat and Poultry Processing Waste
The meat and poultry processing industries produce a significant amount of waste, most commonly in the form of animal offal, wastewater, and chemical byproducts. Pumping tough solid waste in the meat and poultry industry is difficult and causes problems for many different types of pumps. These solids can clog pumps and create other problems in production.
The solution for that application is Accuvon Rotary lobe pump AF 125 and Multicrusher HAF 125 . A chopper attachment can help to reduce the size of food solids before they even enter the pumping system. Additional grinders, set up in a sequence, are often the route taken to fully treat the liquid before disposal. This ensures the waste complies with the local regulations in regards to organic waste handling.
Application:
Type: AF 125 + HAF 125
Medium: Meat and Poultry Processing Waste
Capacity: 5-100 m3/h
Pressure: 2 -8 bar
Technical Data:
Casing: GG 25 in MIP-Design
Rotor: in FPM
Seal: in FPM
Low speed hydraulic drives with high operating torque.
More choice for lobe pump
| ACCUVON | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
More choice for Multicrusher
| Model | Flow(max) | velocity of flow | Standard DN mm | Optional DN mm | Standard power | Optional power |
| HAC 50 | 10 m³/h | 4m/s | DN50 | DN 65 | 3Kw | 2.2KW |
| HAP 80 | 25 m³/h | 3m/s | DN80 | DN100 | 3Kw | 4Kw |
| HAP 100 | 40 m³/h | 3m/s | DN100 | DN125 | 3Kw | 4Kw |
| HAP 120 | 60 m³/h | 3m/s | DN100 | DN125 | 3Kw | 4Kw/5.5Kw |
| HAP 140 | 80 m³/h | 3m/s | DN125 | DN150 | 3Kw | 5.5Kw |
| HAF 125 | 100 m³/h | 3.1m/s | DN125 | DN150 | 7.5Kw | 11Kw |
| HAF 150 | 150 m³/h | 3.1m/s | DN150 | DN200 | 11Kw | |
| HAF 200 | 200 m³/h | 3.1m/s | DN200 | DN250 | 11Kw | |
| HAX 250 | 300 m³/h | 2.4m/s | DN250 | DN300 | 18.5Kw | |
| HAX 300 | 500 m³/h | 2.4m/s | DN300 | DN350 | 18.5Kw | |
Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements
1. Tested medium in the table: water.
2. Speed, flow rate, electrical power and pressure will be according to different liquid properties.
3. Port size can be changed as needed.
4. ACCUVON reserves the right to change specifications without prior notification.
Advantage
- Low energy consumption
- Simplified maintenance
- Reasonable spare parts
- Screwed rotor allows for low-pulse operation
- Maintenance friendly with the outstanding MIP- Design
- Allows reversal of the flow direction – in any operating state – by simply changing the direction of rotation.
- Long durability
- No clogging and no tangle.
Quality inspection photos
Product Tags:
|
|
Self Priming Food Waste Pumps Multi Crusher For Meat And Poultry Waste Images
|
